Kyocera ECOSYS FS-1135MFP Technical Reference Manual

Chapter 7 Emulation
7-22
Figure 7. 11. Epson LQ-850 Font Printout
The five LQ-850 fonts actually use the printing system’s resident fonts. The font mode in
the Epson emulation is 0. (The printing system does not automatically adjust character
spacing.) If you do not need exact character spacing, you can improve the appearance of
these fonts by changing to font mode 13. The printing system generates double-wide and
double-high effects for these emulating fonts.
To use other printing system fonts, select them with font commands (FONT, SFNT, and
FSET). Since the printing system emulates certain LQ-850 fonts in different spacings by
using the same resident font, it should be noted that substituting one font will also
change the other fonts emulated by that font. For example, if you change the Draft 15 cpi
font which is emulated by the PrestigeEliteBM7.2-Roman font, this will also affect the
other 15 cpi LQ-850 fonts using the same ALTF 7; setting.
Table 7.12. Epson LQ-850 Fonts (Sheet 1 of 2)
Font name Character spacing ALTF No.
Draft/Epson Courier 10 cpi, Proportional 0
12 cpi 1
15 cpi 7
Condensed 10 cpi 8
Condensed 12 cpi, Condensed proportional 9
Epson Roman 10 cpi, proportional 2
12 cpi 3
15 cpi 7
Condensed 10 cpi 8
Condensed 12 cpi, Condensed proportional 9
Epson Sans Serif 10 cpi, 12 cpi, proportional 4
15 cpi 5
Condensed 10 cpi 8
Condensed 12 cpi, Condensed proportional 9

Kyocera ECOSYS FS-1135MFP Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Standard Memory	256 MB
Connectivity	USB 2.0, Ethernet
Scanner Type	Flatbed, ADF
Scan Resolution	600 x 600 dpi
Copier Resolution	600 x 600 dpi
Fax Capability	Yes
Fax Transmission Speed	33.6 kbps
Maximum Paper Size	A4
Operating System Compatibility	Windows, Mac OS, Linux
Dimensions	494 x 430 x 448 mm
Print Speed	35 ppm
Standard Input Capacity	250 sheets
Copy Speed	Up to 35 cpm
Maximum Input Capacity	800 sheets (with optional paper feeders)