Kyocera ECOSYS FS-1135MFP Technical Reference Manual

iii
Introduction
This manual contains information needed to use the firmware features provided by the
Kyocera printing system. Among these features is PRESCRIBE, a highly accessible,
human-readable command language that makes it easy for programmers to take full
advantage of the printing system’s capability.
The PRESCRIBE command language allows to:
• extensive manipulation of fonts and character code tables
• use the ability to draw objects by constructing and manipulating paths including
ellipses and round boxes, etc.
• execute macros including carbon-copy macro
• control external optional units (feeders, etc.)
You can access the features of PRESCRIBE from any of the seven emulation modes.
These modes include:
• Hewlett-Packard LaserJet emulation
• Hewlett-Packard HP 7550A (plotter) emulation
• IBM Proprinter X24E (24-pin dot matrix printer) emulation
• Epson LQ-850 (24-pin dot matrix printer) emulation
• Diablo 630 emulation
• generic line printer emulation
• KPDL (Apple LaserWriter II NTX (NT) emulation) [an option on some models]

Kyocera ECOSYS FS-1135MFP Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Standard Memory	256 MB
Connectivity	USB 2.0, Ethernet
Scanner Type	Flatbed, ADF
Scan Resolution	600 x 600 dpi
Copier Resolution	600 x 600 dpi
Fax Capability	Yes
Fax Transmission Speed	33.6 kbps
Maximum Paper Size	A4
Operating System Compatibility	Windows, Mac OS, Linux
Dimensions	494 x 430 x 448 mm
Print Speed	35 ppm
Standard Input Capacity	250 sheets
Copy Speed	Up to 35 cpm
Maximum Input Capacity	800 sheets (with optional paper feeders)