6-3
Sending > Basic Operation
1 Press the Send key
2 Place the originals
For details, refer to Loading Originals on page 3-7.
3 Specifying destination
Select the destination to which to send an image.
For details, refer to Specifying Destination on page 6-17.
4 Selecting the functions
Press [Functions] to display the sending functions to use.
For details, refer to Sending Functions on page 6-39.
If the touch panel is turned off, press the Energy Saver key or the
Power key and wait for the machine to warm up.
To Next Page
Loading...
