9-31
Setup, Registration, and User Management > User Login Administration
Enter a domain name.
When selecting [NTLM] or [Kerberos] as the server type, enter a domain name of 256
characters or less.
Enter the port number.
When selecting [Ext.] as the server type, enter the port number.
Press [Save].
If the login user name and password are rejected, check the following settings.
• Network Authentication setting of the machine
• User property of the Authentication Server
• Date and time setting of the machine and the Authentication Server
If you cannot login because of the setting of the machine, login with any administrator
registered in the local user list and correct the settings. If the server type is [Kerberos], only
domain names entered in uppercase will be recognized.
Input:
Limit:
poitrq
l
uyew
kgfajhds
.vc@xz
abc
Del.
3
256
A/a
mnb
Cancel OK
ABC
Network Authentication - Domain Name
User Login - Network Authentication
Kerberos
10:10
Cancel
System Menu/Counter.
Host Name
Domain Name
Server Type
< Back
1/1
Save
abc
Network Authentication - Port
10:10
(1 - 65535)
Cancel OK
System Menu/Counter.
User Login - Network Authentication
Ext.
10:10
Cancel
System Menu/Counter.
Host Name
Port
Server Type
< Back
1/1
Save
abc
9093
User Login - Network Authentication
Ext.
10:10
Cancel
System Menu/Counter.
Host Name
Port
Server Type
< Back
1/1
Save
abc
9093
To Next Page
Loading...
Need help?
General
