Kyocera ECOSYS FS-C5150DN User Manual

4 Basic
In the Basic tab, you can specify the most commonly used printer driver
settings.
To return to the original settings, click Reset. The Reset button is available
when accessing the printer driver from the application's Print dialog box.
Basic Settings
The Basic tab contains several settings for the most commonly used printing
tasks.
Print size
This setting sets the size of the area that the printer prints to, regardless of
the actual paper size that is used by the printing system.
Source
This setting specifies the cassette or tray that the printing system draws
paper from. Unless you are using a custom paper type, you can leave it set
to Auto source selection.
Page Sizes
This setting should match the page size setting in your application. The
printing result is based on the page size specified in this setting. You can
also create a custom page size.
Media type
This setting selects the Source based on the types of media that are
specified in the printing system. In general, you can leave it set to
Unspecified.
Printer Driver 4-1

Kyocera ECOSYS FS-C5150DN Specifications

General

Print Technology	Laser
Resolution	600 x 600 dpi, Multi-bit technology for print quality of up to 9, 600 x 600 dpi
Duplex Printing	Yes
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Operating System Compatibility	Windows, Mac OS, Linux
Paper Input Capacity	250-sheet standard tray, 50-sheet multipurpose tray
Memory	256 MB RAM, upgradeable to 768 MB
Dimensions	390 mm
Supported Paper Sizes	A4, A5, A6, B5, Letter, Legal
Print Speed	Up to 21 pages per minute (Color and Monochrome)