Kyocera ECOSYS M2035dn

2PK/2PL/2PM/2PN-8
1-3-35
U346 Selecting Sleep Mode
Description
Switches configurations for sleep modes.
Purpose
Use this to switch configurations for sleep modes.
Method
1. .Select the item to set.
Setting:Timer/Sleep Level
1. Select On or Off.
Initial setting: More Energy Save
2. Press the start key. The setting is set.
3. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
Setting:Auto Sleep
1. Press the start key.
2. Select On or Off.
Initial setting: On
3. Press the start key. The setting is set.
Completion
Press the stop key.
* : The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
Timer/Sleep Level Undisplayed setting of BAM conformity Timer change and
Sleep Level
Auto Sleep On/Off setting of an Auto Sleep function
Display Description
More Energy Save
BAM fit setting On
Less Energy Save
BAM fit setting Off
Display Description
On On setting
Off Off setting