Troubleshooting > Troubleshooting
659
"Running security function..." is displayed
The security function is running.
Please wait.
"Scanner memory is full." is displayed
Scanning cannot be performed due to insufficient memory of the scanner.
Follow the instructions on the screen.
"Scheduled sending jobs exceeded." is displayed
The number of timer transmissions that can be set has been exceeded.
Select [End]. The job is canceled.
Wait until the delayed transmission is executed, or cancel the delayed transmission and then perform the job
again.
"Select another cassette." is displayed
Is the selected cassette correct?
The specified cassette is dedicated for the fax machine.
Select another valid cassette and then select [Continue].
"Send error." is displayed
An error has occurred during sending.
The job is canceled. Select [End]. Refer to the transmission error code list for the error code and its details.
➡ List of Transmission Error Codes (page 671)
NOTE
If Auto Error Clear is set to [On], the process will resume automatically after a set period of time. For details, refer
to the following:
➡ Auto Error Clear (page 435)
To Next Page
Loading...
