Troubleshooting > Troubleshooting
667
"Toner [C][M][Y][K] is low. (Replace when empty.)" is displayed
It is almost time to replace the toner container.
Obtain a new toner container.
"Toner type mismatch. Please install correct toner." is displayed
Does the type of toner you have match the model?
Please install correct toner.
"USB Drive error." is displayed
Is the USB drive write-protected?
An error occurred in the USB drive. The job is canceled. Select [End].
The following error code is displayed:
01: Connect a writeable USB drive.
An error occurred in the USB drive.
The job is canceled. Select [End].
The following error code is displayed:
01: The amount of data that can be saved at once has been exceeded. Restart the system or turn the power
OFF/ON.
If the error persists, the USB drive is not compatible with the machine. Use the USB drive formatted by this
machine. If the USB drive cannot be formatted, it is damaged. Connect a compatible USB drive.
NOTE
If Auto Error Clear is set to [On], the process will resume automatically after a set period of time. For details, refer
to the following:
➡ Auto Error Clear (page 435)
To Next Page
Loading...
