Troubleshooting > Troubleshooting
684
1106 "Failed to send the email." is displayed
Message
Failed to send the email.
Check the sender address of SMTP on the Command Center RX
Job is canceled. Press [End].
1106
Corrective Actions
Check the sender address on the SMTP server from Command Center RX.
1
Launch your Web browser.
2
In the address or location bar, enter the machine's IP address or the host name.
3
Log in with administrator privileges.
4
Click [E-mail] of the [Functions] Menu.
5
Set the [Sender Address] in "E-mail Send Settings".
Please specify an email address that can be received by the Machine Administrator. The sender address
must be entered correctly for SMTP authentication. The maximum length of the sender address is 256
characters.
6
Click [Submit].
➡ SMTP and E-mail Settings (page 120)
To Next Page
Loading...
