Troubleshooting > Troubleshooting
685
1131 "Failed to send via FTP." is displayed
Message
Failed to send via FTP.
Select [On] of the secure protocol settings on the Command Center RX
Job is canceled. Press [End].
1131
Corrective Actions
Please set to allow the use of TLS.
1
Launch your Web browser.
2
In the address or location bar, enter the machine's IP address or the host name.
3
Log in with administrator privileges.
4
Click [Network Security] in the [Security Settings]
5
Set [TLS] to [On]
6
Click [Submit].
➡ Command Center RX User Guide
To Next Page
Loading...
