EasyManuals Logo
Home>Kyocera>Printer>ECOSYS P4040dn

Kyocera ECOSYS P4040dn User Manual

Kyocera ECOSYS P4040dn
317 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #125 background imageLoading...
Page #125 background image
4-59
Operation Panel
3
Press or to select whether Auto-IP is enabled.
4
Press [OK]. The Auto-IP setting is set and the IPv4 Setting menu
reappears.
IP Address (IP address setting)
An IP address is the address of a network device such as a computer and is included in IP packets as needed for the
sending and receiving of Internet data (IP packets). (IP addresses can be either destination addresses or source
addresses.)
Specifically, an IP address is a bit string consisting of a host address (or host section) that identifies a computer (host)
connected to the Internet and a network address (or network section) that identifies the network to which that computer
belongs (or more specifically, the computer's network interface). Bit strings (IP addresses) that are unique throughout the
entire Internet system are allocated to each computer or interface.
The IP addresses currently used on the Internet (IPv4) have a fixed length of 32 bits.
1
In the IPv4 Setting menu, press or to select IP Address.
2
Press [OK]. The IP Address screen appears.
3
Use the numeric keys or press or to set the IP address.
You can set any value between 000 and 255.
Increase or reduce the figures by pressing or .
Use and to move the position being entered, which is shown
highlighted.
4
Press [OK]. The IP address is stored and the IPv4 Setting menu
reappears.
Subnet Mask (Subnet mask setting)
The subnet mask is a way of augmenting the network address section of an IP address.
A subnet mask represents all network address sections as 1 and all host address sections as 0. The number of bits in the
prefix indicates the length of the network address. The term "prefix" refers to something added to the beginning and, in this
context, indicates the first section of the IP address.
When an IP address is written, the length of the network address can indicated by the prefix length after a forward slash
(/). For example, "24" in the address "133.210.2.0/24". In this way, "133.210.2.0/24" denotes the IP address "133.210.2.0"
with a 24-bit prefix (network section).
This new network address section (originally part of the host address) made possible by the subnet mask is referred to as
the subnet address.
1
In the IPv4 Setting menu, press or to select Subnet Mask.
2
Press [OK]. The Subnet Mask screen appears.
Note
When you enter the IP address, be sure to set the DHCP setting to Off.
IP Address:
0. 0. 0. 0
Note
When you enter the subnet mask, be sure to set the DHCP setting to Off.
Subnet Mask:
0. 0. 0. 0

Table of Contents

Other manuals for Kyocera ECOSYS P4040dn

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera ECOSYS P4040dn and is the answer not in the manual?

Kyocera ECOSYS P4040dn Specifications

General IconGeneral
ColorNo
Duplex printingYes
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Duplex printing modeAuto
Time to first page (black, normal)7.5 s
Print speed (black, normal quality, A3)22 ppm
Print speed (black, normal quality, A4/US Letter)40 ppm
Printing colorsBlack
Maximum duty cycle150000 pages per month
Number of print cartridges1
Page description languagesEpson LQ, IBM ProPrinter XL24E, Microsoft XPS, PCL 5c, PCL 6, PCL XL, PDF 1.7, PostScript 3
Paper input typeCassette, Paper tray
Total input capacity600 sheets
Total output capacity500 sheets
Maximum input capacity2600 sheets
Maximum number of input trays6
Multi-Purpose tray input capacity100 sheets
Custom media width70 - 297 mm
Custom media length148 - 450 mm
Paper tray media typesPlain paper
Paper tray media weight60 - 120 g/m²
Non-ISO print media sizesFolio (media size), Letter (media size)
ISO A-series sizes (A0...A9)A3, A4, A5, A6
ISO B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA3
Multi-Purpose Tray media weight60 - 220 g/m²
Wi-Fi-
Mobile printing technologiesApple AirPrint
Standard interfacesEthernet, USB 2.0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Processor model465
Processor familyPowerPC
Noise level (idle)30 dB
Maximum internal memory1280 MB
Sound pressure level (printing)50.4 dB
Sound pressure level (quiet mode)49.6 dB
DisplayLCD
CertificationTUV, GS, CE
Product colorBlack, White
Display number of lines5 lines
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (off)0.1 W
Power consumption (standby)14 W
Power consumption (printing)586 W
Power consumption (PowerSave)1.5 W
Sustainability certificatesENERGY STAR
Mac operating systems supportedMac OS X 10.5 Leopard
Other operating systems supportedAndroid, iOS
Weight and Dimensions IconWeight and Dimensions
Depth410 mm
Width469 mm
Height320 mm

Related product manuals