4-63
Operation Panel
Protocol Detail (Detailed settings for the network protocol)
This selects the settings for Protocol Detail.
Use the procedure below.
1
In the TCP/IP Settings menu, press or to select Protocol
Detail.
2
Press [OK]. The Protocol Detail menu screen appears.
3
Press or to select the item for which you want to make settings.
4
Press [OK]. This displays the setting screen for the item selected in
step 3.
The screen shown is the one when NetBEUI is selected.
5
Press or to select On or Off.
6
Press [OK]. The Protocol Detail menu reappears.
Item Description Default Setting
Restarting the System
†
†
: The machine must be restarted after the setting is changed.
×: The machine does not need to be restarted after the setting is changed.
NetBEUI Selects whether or not to receive
documents using NetBEUI.
On ×
SNMPv3 Set SNMPv3. Off
FTP (Server) Select whether or not to receive
documents using FTP.
On
SNMP Select whether or not to
communicate using SNMP.
On
SMTP (E-mail TX) Select whether or not to send e-
mail using SMTP.
Off ×
POP3 (E-mail RX) Select whether or not to receive e-
mail using POP3.
Off ×
RAW Port Select whether or not to
communicate using RAW Port.
On
LPD Select whether or not to receive
documents using LPD as the
network protocol.
On
HTTP Select whether or not to
communicate using HTTP.
On
LDAP Select whether or not to use LDAP. Off ×
To Next Page
Loading...
Need help?
General
Weight and Dimensions
