Kyocera ECOSYS P4040dn

4-99
Operation Panel
9 Pressing [Login] ([Right Select]). If the entered Login User Name
and Login Password are correct, the Security menu screen
appears.
Network Security (Network security setting)
Use this procedure to specify the security settings for each of the network protocols used.
The options available in Network Security are as follows:
• WSD-PRINT (WSD-PRINT setting)...4-99
• Enhanced WSD (Enhanced WSD setting)...4-100
• EnhancedWSD(SSL) (Enhanced WSD (SSL) setting)...4-100
• IPP (IPP setting)...4-100
• SSL Setting (SSL Server setting)...4-101
• IPSec (IPSec setting)...4-103
• ThinPrint (Thin Print setting)...4-103
• LAN Interface (LAN Interface setting)...4-104
1 In the Security menu, press  or  to select Network
Security.
2 Press [OK]. The Network Security menu screen appears.
WSD-PRINT (WSD-PRINT setting)
Select whether or not to use WSD Print. The default setting is On.
1 In the Network Security menu, press  or  to select WSD-
PRINT.
2 Press [OK]. The WSD-PRINT screen appears.
3 Press  or  to select whether WSD-PRINT is enabled.
4 Press [OK]. The WSD-PRINT setting is set and the Network
Security menu reappears.
Security:
Security Level
Exit
03
I/F Block Set.
02
01
Network Security
IMPORTANT Check with your network administrator when selecting network settings.
Network Security:
EnhancedWSD(SSL)
Exit
03
Enhanced WSD
02
01
WSD-PRINT
WSD-PRINT:
Off
01
On
02
*