Kyocera ECOSYS P4040dn

Operation Panel
4-134
7 Press [OK]. The Login Password entry screen is displayed.
8 Enter the Login Password using the numeric keys then press [OK].
The login screen reappears.
9 Pressing [Login] ([Right Select]). If the entered Login User Name
and Login Password are correct, the Op Functions menu appears.
10 Press  or  to select the desired application.
11 Press [OK].
12 Press  or  to select License On.
13 Press [OK].
14 Press  or  to select Official.
15 Press [OK].
16 Use the numeric keys or press  or  to enter the license key.
Use  and  to move the position being entered, which is shown
highlighted.
Login Password:
Text
ABC
Login User Name:
Login
Login Password:
4000
Note The initial setting for the administrator's Login
Password is "4000".
For details on entering characters, refer to Character Entry
Method on page A-2.
Op Functions:
UG-33
Exit
03
ID Card
02
01
DATA SECURITY
DATA SECURITY:
License On
01
Detail
02
Note You can view detailed information on the selected
application by selecting Detail.
License On:
Official
01
Note There are also some applications that can be used for
a limited trial period. To use the application as a trial, select
Trial and press [OK]. The confirmation screen is displayed
so press [Yes] ([Left Select]).
License Key:
0000
(0000 - 9999)
0000--
Note Some applications do not require you to enter a
license key.