Legal and Safety
OPERATION GUIDE xix
Introduction
This Operation Guide has following chapters:
1 Machine Parts - identifies the names and functions of the machine and
operation panel.
2 Loading Paper - contains explanations on loading paper and attaching the
manual feed tray.
3 Preparations - contains information on setting the machine up ready for use.
4 Copy Functions - explains how to make copies.
5 Scanning Functions - explains how to scan originals.
6 Printing Functions - explains how to make prints.
7 Using QLINK - explains how to use QLINK software.
8 System Settings - explains the procedures to make the various settings.
9 Maintenance - describes the maintenance and toner replenishment
procedures.
10 Troubleshooting - explains how to handle problems such as error indications
or paper jams.
11 Specifications - contains machine specifications.
To Next Page
Loading...
