Loading Paper
OPERATION GUIDE 2-5
Envelopes should be fed in the face-up
position, right edge first.
NOTE: Prior to purchasing envelopes,
print a sample to check quality.
IMPORTANT: Slide the paper firmly into the
tray until it stop.
Load one sheet or envelope at a time.
Start printing after loading the Manual Feed Tray.
6
After use, move the width guides fully outwards and close the Manual Feed Tray.
NOTE: For further information about the sizes and types of media that can be
used, refer to Specifications on page 11-1.
7
Pull out the paper stopper.
Selecting Paper Size
After loading paper, you need register the paper size.
The paper size that can be used are: A4, Letter, Legal, A5, B5, OfficioII,
Executive, Statement, Folio, B6, A6, ISO B5, Envelope C5,
Envelope #10, Envelope DL, Envelope #9, Monarch, Envelope #6, 16K
To Next Page
Loading...
