Using QLINK
7-2 OPERATION GUIDE
MFP Button Setting Section
Using the Scan To PC Button on the Operation Panel to Scan
Using [Scan to PC] eliminates the need to manually launch the specific applications
and allows you to scan a document directly to a folder on your computer.
1
Place the original face up in the Document Processor, or face down on the platen.
2
Press [Scan to PC] on the operation panel.
3
Press W or X to select an application item in the message display.
4
Press [OK] to confirm your selected application item.
5
Press [Start] to start the scanning process.
Configuring the Scan To PC Button
When the QLINK is displayed, click the Scan to on the QLINK, and Edit Application
list appears, as shown below:
New Application
New Application allows you to add your extra desired application item.
Edit
Edit allows you to change your application item or its properties in the list.
To Next Page
Loading...
