How to resolve 'Top tray is full of Paper. Remove the paper' message on Kyocera Printer?
If your Kyocera printer displays the message 'Top tray is full of Paper. Remove the paper', remove paper from the top tray, and press the OK key to resume the job.
How to resolve 'Load paper in MP Tray' error on Kyocera Printer?
If your Kyocera printer displays the 'Load paper in MP Tray' message, load the paper in the multi purpose tray which is of the size and type indicated on the Message Display.
What to do if my Kyocera All in One Printer copies are not clear?
If your Kyocera All in One Printer copies are not clear, select an appropriate image quality.
Why does my Kyocera FS-1128MFP All in One Printer keep jamming paper?
If your Kyocera All in One Printer is jamming paper frequently: * Ensure the paper is loaded correctly. * Verify the paper type is supported and in good condition; try turning the stack over. * Replace curled, folded, or wrinkled paper. * Remove any loose scraps or jammed paper from the machine.
How to resolve 'Incorrect account ID. Job is canceled' message on Kyocera Printer?
If your Kyocera printer displays the message 'Incorrect account ID. Job is canceled', enter the correct login user name or password.
What to do if my Kyocera FS-1128MFP displays 'Add paper in cassette 1 (~3). or Add paper in MP tray.'?
If your Kyocera All in One Printer shows 'Add paper in cassette 1 (~3). or Add paper in MP tray', it means: * The indicated cassette or MP tray is out of paper. Add paper of the same size as indicated. When the type of printing paper is specified, the necessary paper types are also displayed. To use another paper source, select the paper source and press the OK key. * The type of printing paper is specified, but the cassette for the specified paper type is not available. Press [Paper] (the Right Select key), select another paper source, and then press the OK key. * The cassette is not securely loaded. Remove the cassette and reload it completely.
What to do if my Kyocera Printer printouts are too dark?
If your Kyocera printer's printouts are too dark, it could be due to the density settings. If the machine is in Auto Density mode, set the correct density level. If the machine is in Manual Density mode, select the correct density level.
How to fix dirty printouts from Kyocera Printer?
If your Kyocera printer produces dirty printouts, the platen or document processor may be dirty, so clean them. Also, the charger wire could be dirty, so ensure you clean that as well.
What to do if my Kyocera Printer printouts are too light?
If your Kyocera printer's printouts are too light, several factors could be the cause. If the machine is in Auto Density mode, set the correct density level. If it's in Manual Density mode, select the correct density level. Shake the toner container from side to side to distribute the toner evenly. If there's a message indicating the need for toner, replace the toner container. Damp paper can also cause light prints, so replace the paper with new paper. Finally, check if EcoPrint mode is enabled and, if so, disable it.
What to do if my Kyocera Printer is not printing?
If your Kyocera printer is not printing, first, ensure the power cord is plugged into an AC outlet and that the main power switch is turned on. Check that the printer cable is securely connected. If the printer cable was connected before powering on the machine, power cycle the printer. Finally, verify that the print job is not paused; if it is, press the Resume key to resume printing.
General| Duplex printing | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 6 s |
| Print speed (black, normal quality, A4/US Letter) | 28 ppm |
| Printing colors | Black |
| Maximum duty cycle | 20000 pages per month |
| Page description languages | PCL 5e, PCL 6, PCL XL |
| Scan to | FTP |
| Grayscale levels | 256 |
| Image formats supported | JPG, TIF |
| Optical scanning resolution | - DPI |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 600 x 600 DPI |
| Maximum number of copies | 999 copies |
| Time to first copy (black, normal) | 6.9 s |
| Faxing | Mono faxing |
| Fax memory | 100 pages |
| Modem speed | 33.6 Kbit/s |
| Fax coding methods | JBIG, MMR (Fax coding method), MR |
| Fax transmission speed | 3 sec/page |
| Total input capacity | - sheets |
| Total output capacity | 150 sheets |
| Maximum input capacity | 800 sheets |
| Internal memory | 256 MB |
| Processor model | 440 |
| Processor family | PowerPC |
| Maximum internal memory | 768 MB |
| Sound power level (standby) | 30 dB |
| Sound pressure level (copying) | 52 dB |
| Custom media sizes | 105 x 148mm/216 x 356mm |
| Dimensions (WxDxH) | 494 x 410 x 366 mm |
| Power requirements | AC 220 - 240 V, 50/60Hz |
| All-in-one functions | Copy, Fax, Scan |
| Color all-in-one functions | scan, n |
| Compatible operating systems | Windows 2000/XP/Server 2000/Server 2003/ Vista/Server 2008, MAC OS 9.X, MAC OS X, Linux |
| Maximum print size | 216 x 356 mm |
| Duplex media weight | 60 - 105 g/m² |
| Paper tray media types | Envelopes |
| Paper tray media weight | 60 - 120 g/m² |
| Non-ISO print media sizes | Folio |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 220 g/m² |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | 1 |
| Power consumption (standby) | 91 W |
| Power consumption (PowerSave) | 10.2 W |
| Power consumption (average operating) | 494 W |
| Certification | TÜV/GS, CE |
| Display | - |
| Market positioning | Business |
| Supported network protocols (IPv6) | SNMPv3, SSL, IPsec |
| Sustainability certificates | ENERGY STAR |
| Harmonized System (HS) code | 84433100 |
Explanation of symbols and warning levels (DANGER, WARNING, CAUTION).
Safety measures during installation.
Safety measures during maintenance procedures.
Recommended conditions for installation and operation.
Instructions on how to enter and operate maintenance mode.
Overview of the management mode for user settings.
List of maintenance functions, their contents, and initial settings.
Information on detecting and indicating paper misfeeds.
How the machine performs self-diagnosis and displays errors.
Overview of common image formation issues.
Troubleshooting electrical issues with the machine.
Troubleshooting common mechanical issues.
Explanation of error code structure and indications.
Error codes related to sending functions (SMB, FTP, E-mail, Twain).
General precautions before disassembling or assembling parts.
To Next Page
