Kyocera FS-1128MFP - Service Manual

Other manuals for Kyocera FS-1128MFP

Operation Guide439 pages

Driver Guide48 pages

Fax Guide188 pages

Questions and Answers:

K
Kayla WalkerAug 30, 2025
Why my Kyocera All in One Printer cannot perform sub address transmission?
- S
  sandralarsonAug 30, 2025
  Your Kyocera All in One Printer may fail to perform sub address transmission due to these reasons: * The recipient fax machine may not be equipped with a sub address transmission feature. Sub address transmission cannot be performed unless the recipient fax machine has a similar sub address transmission feature. * The entered sub address or sub address password may not be identical to the sub address or sub address password registered in the recipient fax machine. If your entry is correct, check with the recipient. * There may not be enough free space available in the memory of the recipient fax machine. Check with the recipient.
B
Bobby HamptonAug 30, 2025
Why my Kyocera FS-1128MFP All in One Printer cannot perform memory forwarding?
- D
  Dakota CuevasAug 30, 2025
  If your Kyocera All in One Printer cannot perform memory forwarding, check the memory forwarding setting to ensure it is set to [On].
A
amendozaAug 30, 2025
Why my Kyocera All in One Printer cannot store memory forwarding data in a Sub Address Box?
- C
  Carly HernandezAug 31, 2025
  Your Kyocera All in One Printer may fail to store memory forwarding data in a Sub Address Box because: * The Sub Address Box may not be specified correctly. Check the memory forwarding setting. * There may not be enough free space available in the memory. Receive after the memory has free space, or create free space in the memory.
C
codyreynoldsSep 23, 2025
What does 'Job Accounting restriction exceeded' mean on Kyocera FS-1128MFP All in One Printer?
- M
  Max JacksonSep 23, 2025
  If your Kyocera All in One Printer displays 'Job Accounting restriction exceeded. Cannot print', the job is canceled. Press the OK key.
D
Dr. Kyle Pitts MDSep 18, 2025
Why is the image size shrunk when displaying an image sent from the Kyocera All in One Printer on the PC?
- R
  Robert ColemanSep 18, 2025
  If the image size is shrunk when displaying an image sent from your Kyocera All in One Printer on the PC, it may be because the selected scan resolution is 200×100dpi Normal or 200×400dpi Super Fine. Select a different scan resolution.
H
heatherlarsonSep 14, 2025
What to do if my Kyocera All in One Printer displays 'Machine failure. Call service.'?
- D
  Deanna WelchSep 14, 2025
  If your Kyocera All in One Printer displays 'Machine failure. Call service.', an internal error has occurred. Make a note of the error code displayed on the Message Display. Turn off the machine, unplug the power cord, and contact your Service Representative.
C
Christopher FergusonSep 1, 2025
What to do if my Kyocera All in One Printer prints blank sheets?
- B
  browndanielSep 1, 2025
  If your Kyocera All in One Printer is ejecting blank sheets, it might be due to the originals being loaded incorrectly. If using the platen, place the originals face-down and align them with the original size indicator plates. If using the optional document processor, place the originals face-up.
H
Howard WashingtonSep 1, 2025
How to fix light printouts on my Kyocera FS-1128MFP All in One Printer?
- D
  Darlene LewisSep 1, 2025
  Light printouts from your Kyocera All in One Printer can be caused by several factors: * If the machine is in Auto Density mode, set the correct density level. * If in Manual Density mode, select the appropriate density level. * The toner may not be evenly distributed; shake the toner container from side to side several times. * You may need to replace the toner container if a message indicates it. * The paper could be damp; replace it with new paper. * EcoPrint mode might be enabled; disable EcoPrint mode.
S
Samantha DixonSep 1, 2025
What to do if my Kyocera FS-1128MFP All in One Printer is printing dirty?
- K
  Kimberly FrancoSep 1, 2025
  Dirty printouts from your Kyocera All in One Printer can be caused by a dirty platen or document processor; clean them. Alternatively, the charger wire may be dirty; clean the charger wire.
K
Katrina AndersonSep 2, 2025
How to troubleshoot a Kyocera FS-1128MFP that cannot print?
- J
  Joanne KingSep 2, 2025
  If your Kyocera All in One Printer cannot print, check the following: * Ensure the power cord is plugged into an AC outlet. * Verify the main power switch is turned on. * Make sure the printer cable is securely connected. * Ensure the machine was powered on after connecting the printer cable. * If the print job is paused, press [Resume] to resume printing.

Kyocera FS-1128MFP Specifications

General

Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	6 s
Print speed (black, normal quality, A4/US Letter)	28 ppm
Printing colors	Black
Maximum duty cycle	20000 pages per month
Page description languages	PCL 5e, PCL 6, PCL XL
Scan to	FTP
Grayscale levels	256
Image formats supported	JPG, TIF
Optical scanning resolution	- DPI
Copier resize	25 - 400 %
Maximum copy resolution	600 x 600 DPI
Maximum number of copies	999 copies
Time to first copy (black, normal)	6.9 s
Faxing	Mono faxing
Fax memory	100 pages
Modem speed	33.6 Kbit/s
Fax coding methods	JBIG, MMR (Fax coding method), MR
Fax transmission speed	3 sec/page
Total input capacity	- sheets
Total output capacity	150 sheets
Maximum input capacity	800 sheets
Internal memory	256 MB
Processor model	440
Processor family	PowerPC
Maximum internal memory	768 MB
Sound power level (standby)	30 dB
Sound pressure level (copying)	52 dB
Custom media sizes	105 x 148mm/216 x 356mm
Dimensions (WxDxH)	494 x 410 x 366 mm
Power requirements	AC 220 - 240 V, 50/60Hz
All-in-one functions	Copy, Fax, Scan
Color all-in-one functions	scan, n
Compatible operating systems	Windows 2000/XP/Server 2000/Server 2003/ Vista/Server 2008, MAC OS 9.X, MAC OS X, Linux
Maximum print size	216 x 356 mm
Duplex media weight	60 - 105 g/m²
Paper tray media types	Envelopes
Paper tray media weight	60 - 120 g/m²
Non-ISO print media sizes	Folio
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 220 g/m²
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
Power consumption (standby)	91 W
Power consumption (PowerSave)	10.2 W
Power consumption (average operating)	494 W
Certification	TÜV/GS, CE
Display	-
Market positioning	Business
Supported network protocols (IPv6)	SNMPv3, SSL, IPsec
Sustainability certificates	ENERGY STAR
Harmonized System (HS) code	84433100