Why does my Kyocera FS-1128MFP say 'Cannot duplex print on this paper'?
If your Kyocera All in One Printer displays 'Cannot duplex print on this paper', it means the selected paper size/media type is not duplex printable. Select an available paper type, or press the OK key to print without using Duplex.
Why my Kyocera All in One Printer cannot send document?
Your Kyocera All in One Printer might fail to send documents due to several reasons: * The modular cord may not be connected correctly. Ensure it is properly connected. * A communication error might be displayed. Address the cause of the error and try sending again. * The TX (transmission) restriction might be activated. Cancel the TX restriction and try again.
Why my Kyocera All in One Printer cannot receive document?
Your Kyocera All in One Printer might fail to receive documents due to these reasons: * The modular cord may not be connected correctly. Ensure the modular cord is correctly connected. * A communication error might be displayed. Remedy the cause of the error and ask the sender to retry. * The RX (reception) restriction might be activated. Cancel the RX restriction.
What to do if my Kyocera FS-1128MFP All in One Printer displays 'Job Accounting restriction exceeded.'?
If your Kyocera All in One Printer displays 'Job Accounting restriction exceeded', it means the number of papers used has exceeded the limit preset by Job Accounting. Press the OK key to cancel the job. Try the job again after resetting the limit for paper use.
What to do if my Kyocera All in One Printer displays 'Machine failure. Call service.'?
If your Kyocera All in One Printer displays 'Machine failure. Call service.', an internal error has occurred. Make a note of the error code displayed on the Message Display. Turn off the machine, unplug the power cord, and contact your Service Representative.
How to resolve 'Insufficient memory. Cannot start the job' message on Kyocera Printer?
If your Kyocera printer displays the message 'Insufficient memory. Cannot start the job', press the OK key to print the scanned pages or press the Cancel key to cancel the printing job.
Why is my Kyocera FS-1128MFP All in One Printer ejecting blank sheets?
If your Kyocera All in One Printer ejects blank sheets, check if the originals are loaded correctly. When using the platen, place originals face-down and aligned with the original size indicator plates. When using the optional document processor, place them face-up.
Why my Kyocera FS-1128MFP cannot perform memory reception?
Your Kyocera All in One Printer may be unable to perform memory reception if there is not enough free space in the memory. To resolve this, try to receive after the memory has free space, or create free space in the memory.
Why my Kyocera FS-1128MFP All in One Printer cannot perform encrypted communication?
If your Kyocera All in One Printer cannot perform encrypted communication, double-check the registrations both at the sender and recipient ends to ensure they are correct.
Why my Kyocera All in One Printer cannot perform sub address transmission?
Your Kyocera All in One Printer may fail to perform sub address transmission due to these reasons: * The recipient fax machine may not be equipped with a sub address transmission feature. Sub address transmission cannot be performed unless the recipient fax machine has a similar sub address transmission feature. * The entered sub address or sub address password may not be identical to the sub address or sub address password registered in the recipient fax machine. If your entry is correct, check with the recipient. * There may not be enough free space available in the memory of the recipient fax machine. Check with the recipient.
General| Duplex printing | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 6 s |
| Print speed (black, normal quality, A4/US Letter) | 28 ppm |
| Printing colors | Black |
| Maximum duty cycle | 20000 pages per month |
| Page description languages | PCL 5e, PCL 6, PCL XL |
| Scan to | FTP |
| Grayscale levels | 256 |
| Image formats supported | JPG, TIF |
| Optical scanning resolution | - DPI |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 600 x 600 DPI |
| Maximum number of copies | 999 copies |
| Time to first copy (black, normal) | 6.9 s |
| Faxing | Mono faxing |
| Fax memory | 100 pages |
| Modem speed | 33.6 Kbit/s |
| Fax coding methods | JBIG, MMR (Fax coding method), MR |
| Fax transmission speed | 3 sec/page |
| Total input capacity | - sheets |
| Total output capacity | 150 sheets |
| Maximum input capacity | 800 sheets |
| Internal memory | 256 MB |
| Processor model | 440 |
| Processor family | PowerPC |
| Maximum internal memory | 768 MB |
| Sound power level (standby) | 30 dB |
| Sound pressure level (copying) | 52 dB |
| Custom media sizes | 105 x 148mm/216 x 356mm |
| Dimensions (WxDxH) | 494 x 410 x 366 mm |
| Power requirements | AC 220 - 240 V, 50/60Hz |
| All-in-one functions | Copy, Fax, Scan |
| Color all-in-one functions | scan, n |
| Compatible operating systems | Windows 2000/XP/Server 2000/Server 2003/ Vista/Server 2008, MAC OS 9.X, MAC OS X, Linux |
| Maximum print size | 216 x 356 mm |
| Duplex media weight | 60 - 105 g/m² |
| Paper tray media types | Envelopes |
| Paper tray media weight | 60 - 120 g/m² |
| Non-ISO print media sizes | Folio |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 220 g/m² |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | 1 |
| Power consumption (standby) | 91 W |
| Power consumption (PowerSave) | 10.2 W |
| Power consumption (average operating) | 494 W |
| Certification | TÜV/GS, CE |
| Display | - |
| Market positioning | Business |
| Supported network protocols (IPv6) | SNMPv3, SSL, IPsec |
| Sustainability certificates | ENERGY STAR |
| Harmonized System (HS) code | 84433100 |
Explanation of symbols and warning levels (DANGER, WARNING, CAUTION).
Safety measures during installation.
Safety measures during maintenance procedures.
Recommended conditions for installation and operation.
Instructions on how to enter and operate maintenance mode.
Overview of the management mode for user settings.
List of maintenance functions, their contents, and initial settings.
Information on detecting and indicating paper misfeeds.
How the machine performs self-diagnosis and displays errors.
Overview of common image formation issues.
Troubleshooting electrical issues with the machine.
Troubleshooting common mechanical issues.
Explanation of error code structure and indications.
Error codes related to sending functions (SMB, FTP, E-mail, Twain).
General precautions before disassembling or assembling parts.
To Next Page
