Kyocera FS-5800C - Page 111

98
Care and Maintenance
Error Message Possible Cause Corrective Action
Replace IU-80
Imaging unit
The imaging unit is worn
out.
Replace the imaging unit now.
Replace OS-80
Oil supply roll
The oil supply roller is
worn out.
Replace the oil supply roller
now.
Replace Toner
TD-80C (Cyan)
The cyan toner developer
is empty.
Replace the cyan toner devel-
oper now.
Replace Toner
TD-80K (Black)
The black toner developer
is empty.
Replace the black toner
developer now.
Replace Toner
TD-80M (Magenta)
The magenta toner
developer is empty.
Replace the magenta toner
developer now
Replace Toner
TD-80Y (Yellow)
The yellow toner develop-
er is empty.
Replace the yellow toner
developer now.
Reset Transf.Roll
Press ENTER
The printer is waiting for
your input of confirming
that you have replaced the
transfer roller and reset-
ting its counter (☞ P. 105).
Press ENTER and the printer
resets the transfer unit
counter to 0000000.
Set paper
Press CONTINUE
The multi-purpose tray is
empty.
Add a sheet of paper to the
multi-purpose tray, and press
CONTINUE key. (This message
appears when the multi-
purpose tray is in manual
mode (☞ P. 45).
Toner low
TD-80C (Cyan)
The cyan toner developer
is almost empty.
Replace the cyan toner devel-
oper as soon as possible.
Toner low
TD-80K (Black)
The black toner developer
is almost empty.
Replace the black toner
developer as soon as possible.
Toner low
TD-80M (Magenta)
The magenta toner
developer is almost empty.
Replace the magenta toner
developer as soon as possible.
Toner low
TD-80Y (Yellow)
The yellow toner develop-
er is almost empty.
Replace the yellow toner
developer as soon as possible.
Warning FK-80
Fuser KIT
The fuser kit is wearing
out.
Replace the fuser kit as soon
as possible.
Warning IU-80
Imaging unit
The imaging unit is
wearing out.
Replace the imaging unit as
soon as possible.
Warning TU-80
Transfer roller
The transfer roller is
wearing out.
Replace the transfer roller as
soon as possible.
Warning battery
MEMORY CARD
The memory card’s
battery is running out.
Change the memory card
battery as soon as possible.
(See the memory card manu-
facturere’s instruction.)
Warning
Low memory
The printer’s internal
memory is insufficient to
complete the printing.
Press CONTINUE key to print
the page processed so far.
Remove any unnecessary fonts
or macros in the printer or
install additional memory
(☞ P. 67).