Kyocera FS-5800C - Page 42

29
Setup
■ Using Plug and Play
1
Turn on the printer.
2
Turn on the computer and start Windows 95.
The New Hardware Found window is displayed for a few seconds, then the Update
Device Driver Wizard window is displayed.
3
Click Next>.
4
Click Finish.
The Insert Disk window is displayed.
5
Insert the Kyocera Digital Library CD-ROM into your CD-ROM drive.
When the Kyocera Digital Library screen starts, click EXIT.
6
Click OK.
The Copying Files window is displayed.
7
In the Copy File from field, type in your CD-ROM drive name
followed by one of the following directory paths depending on your
country:
USA/Canada/Asia/Pacific: \kei\pcl\9x
U.K.: \keu\pcl\9x
Germany: \kee\pcl\9x
France: \kef\pcl\9x
For example, if you are in U.K. and your CD-ROM drive is D:, type D:\keu\pcl\9x.
8
Click OK.
9
Click on Kyocera FS-5800C Enhanced.
10
Click Next > .
11
Follow the instructions on the screen to complete the installation.
After installation, restart your system.
Note:
The Plug and Play installation procedure varies depending on the version of Windows
95. Refer to Help in Windows 95.