Kyocera FS-5800C - Page 43

30
Setup
■ Using Add Printer
1
Start Windows 95.
2
Quit all applications.
3
Click Start, move the pointer to Settings, then click Printers.
The Printers window is displayed.
4
Double click the Add Printer icon.
The Printer Wizard screen starts.
5
Click Next>.
6
Select Local printer or Network printer and then click Next>.
7
Click Have Disk....
8
Install the Kyocera Digital Library CD-ROM into your computer’s CD-
ROM drive.
When the Kyocera Digital Library screen starts, click EXIT.
9
In the Copy File from field, type in your CD-ROM drive name
followed by one of the following paths of the CD-ROM depending on
your country:
USA/Canada/Asia/Pacific: \kei\pcl\9x
U.K.: \keu\pcl\9x
Germany: \kee\pcl\9x
France: \kef\pcl\9x
For example, if you are in U.K. and your CD-ROM drive is D:, type D:\keu\pcl\9x.
10
Click OK.
11
Click on Kyocera FS-5800C Enhanced.
12
Click Next>.
13
Follow the instructions on the screen to complete the installation.
After installation, restart your system.
Notes:
• The above “Using Add Printer” procedure installs only the printer driver. It does not
install the Status Display program.
• After installing the printer driver, it will take several minutes for the printer to
register and display in Printers Folder.