82
Care and Maintenance
4
(1)Turn the fuser’s large green knob clockwise.
(2)Remove the jammed media.
5
(1)Replace the oil supply roll into the fuser.
(2)Press down firmly on the oil supply roll to snap both sides into
place.
Caution:
If the oil supply roll is not installed correctly, print quality will be diminished.
6
(1)Open the front cover.
(2)Slide the fuser back into the printer.
(1)
(2)
(1)
(2)
(2)
(1)
(2)
To Next Page
Loading...
