Kyocera FS-720 - Left-Edge and Right-Edge Binding; Using Booklet Printing

Useful Functions
99
Booklet Printing
Using the Booklet Printing option, you can print a two-page layout on both sides of single
sheet of paper, then bind it in the center. Booklet printing is available with printers equipped
with duplexers. Stapling and binding requires optional document finishers. For further details
on Staple settings, refer to Staple
on page 83.
The supported paper sizes for Booklet Mode printing are A3, ledger, B4, A4, and letter size.
The Booklet Printing can be combined with the Cover Mode. For further details, refer to
Printing with Covers
on page 88.
Left-Edge and Right-Edge Binding
Printing a four-page document as a booklet, for example, will result in automatic duplex
printing shown below. You can choose between left-edge binding and right-edge binding.
Using Booklet Printing
1. From the application’s Print dialog box, access the printer Properties. (Select Print from
the File menu and select Properties.)
2. Access the printer Properties and click the Layout tab.
L
eft Edge Binding
Outside
Inside
Outside
Outside
Inside
Outside
Inside
Outside
Outside
Inside
ght Edge Binding