118
Saving Jobs in Virtual Mailboxes
1. From the application’s Print dialog box, access the Properties. Select Print from the File
menu and select Properties.
2. Open the Properties dialog box, and click the Output tab.
3. Click the Job Settings... button to open the Job Settings dialog box.
4. Select the Job Storage (e-MPS) check box.
5. Select Virtual Mail Box VMB and click Selection....
If the Virtual Mail Box VMB button is inactive, no virtual mailboxes have been created yet.
Click Cancel in the screen above, and create a virtual mailbox while referring to RAM Disk
Settings on page 20.
6. The Virtual Mailbox Selection dialog box appears. Select the mailboxes for saving the
job, and click OK.
Close the Properties dialog box. The job is saved to the virtual mailbox on the hard disk and
held for printing.
• Printing the list -- Refer to the next section, Printing Virtual Mailbox Job Lists
on
page 119.
• Printing saved jobs -- Refer to Printing Jobs in Virtual Mailboxes
on page 120.
To Next Page
Loading...
