Kyocera FS-720 - Reading with the Barcode Reader

126
7. If you want to print the job ID as characters with the barcode, as shown in the diagram
below, enable the Print Barcode ID check box.
8. From the Position drop-down list, select the barcode position on the page. From the
Orientation drop-down list, select the direction of the barcode.
9. Click OK.
The combinations of barcode printing position and orientations are shown in the table
below.
When printing, the barcode is printed in the designated position.
Reading with the Barcode Reader
When the printed job ID is read by the barcode reader, the printer outputs that page.
Orientations
Position
Upper-Right Lower-Right Upper-Left Lower-Right
Horizontal
Vertical
{28L016T50}