Useful Functions
105
Rotate Collate
The Rotate Collate stacks the sets produced in the top tray in alternating orientations.
This function is available when printing using A4, B5, and letter size paper. During printing,
the same size paper must be loaded into two separate paper cassettes. For example, Portrait
(A4) and Landscape (A4-R) would be used when printing onto A4 paper. The MP tray can
also be used as a paper source.
This function requires a hard disk installed in the printer or a RAM Disk. For further details on
Hard Disk settings, refer to RAM Disk Settings
on page 20.
Using Rotate Collate
1. Access the Properties and click the Output tab.
2. From the Output to drop-down list, select Top Tray (Face-down).
3. Enter the number of sets to be output in the Copies combo box. The number of pages for
all copies of the document being printed must not exceed the tray capacity.
4. Select the Collate and Rotate Collate check boxes.
5. Click OK to return to the Print dialog box, and click OK to start printing. The collated
document sets are delivered in alternating horizontal and vertical orientation.
To Next Page
Loading...
