106
Job Settings
The Job Settings option is available when you install an optional hard disk on the printer. For
further details on hard disk installation and setup, refer to RAM Disk Settings
on page 20.
Private print and Proof and Hold can be used with a RAM disk.
Job Settings offers a variety of functions as listed below.
• Sometimes the application settings are given priority over the printer driver settings,
causing a change in the output method.
• If you select one of the Job Setting options, the hard disk icon displays in the lower corner
of the 3-D image.
Printer Driver Menu
Options
Function
Job Deletion after
Printing
Access Code
Panel Message
(Category)
Default number
of pages printed
Quick Copy
After printing a job, you
can reprint it from the
printer operator panel.
Saved until
printer power is
turned off
No Menu> e-MPS
>Quick Copy
Same as for
original job
(adjustable)
Proof and Hold
When you print multiple
copies, the printer
produces one copy for
proofing and pauses.
You can resume printing
the remaining copies
from the printer operator
panel.
Saved until
printer power is
turned off
No Menu> e-MPS
>Quick Copy
One fewer than
original job
(adjustable)
Private Print
Saves print jobs (without
printing them) for
printing later using the
printer operator panel.
Printing with this function
requires an access
code.
Deleted after
printing
Yes Menu> e-MPS >
Private/Stored
Same as for
original job
(adjustable)
Job Storage
This function is used for
saving frequently used
office forms to print later
as needed.You can print
the required number of
copies later from the
printer operator panel.
Saved until
manually deleted
Optional Menu> e-MPS >
Private/Stored
1
To Next Page
Loading...
