Printing from Applications
71
Half Tone Screen Settings
1. Click Halftone Screen... on the Graphics Settings dialog box. The Halftone Screen
Settings dialog box appears.
2. Clear the Use Printer’s Default Screens check box.
3. Select from the drop-down list for each item, or enter values into the boxes to make
settings. Refer to the options and descriptions listed below.
4. Click OK to save the settings.
Options Descriptions
Ink Determines the color used for the printed output.
Frequency Set the number of lines and units for halftone dots. The units are
lines/cm or lines/inch. Enter a value in the Frequency box, and
select the units from the drop-down list to the right.
Angle Determines the halftone dot angle. The setting can range from
0.0 to 180.0 degrees.
Shape Set the dot shape for halftones.
Choose from: Ellipse, Round, and Line.
Use Accurate Screens Fine adjusts the set values to ensure an accurate number of lines
and halftone angle.
To Next Page
Loading...
