70
4. Determine the Options settings. Refer to the options and descriptions below.
5. Click OK to save your settings.
Options Descriptions
Print Text as Black Prints color and gray characters in black.
There is no effect on white text, color images, or graphics.
Print Graphics as Black
(monochrome printers
only)
Prints colored graphics or text in black, without using
grayscales. There is no effect on images or photographs
(*.bmp, *.jpg, *.psd, *.tiff).
This function is enabled in CAD applications only.
Reverse Image Outputs a reversed black and white negative effect.
Mirror Print Prints a mirror image of the page, with right and left reversed.
Produces a mirror-like effect.
Halftone Screen
(monochrome printers
only)
By disabling GDI compatible mode check box in the PDL
Settings, you can enable the halftone screen settings.
You can adjust the dithering process by changing the number of
dot lines, angle, and dot shapes.
Images are divided into dots. As the number of the dot lines
increases and the interval between the dots grows smaller, the
image is printed more distinctly. As the number is reduced and
the interval between the dots is increased the image is printed
more coarsely. For further details, refer to the next item, Half
Tone Screen Settings on page 71.
To Next Page
Loading...
