Printing from Applications
43
Scaling
Based on the page and print size specified in the Print Size on the Media tab, you can
reduce or enlarge the image from 20 to 500% before printing. However, only one page per
sheet can be printed.
1. Click the Layout tab in the Properties dialog box, and enter the scale percentage into the
Scaling (20-500%) field, or adjust the value as needed. For Windows 95 or 98, scaling is
20 - 480%.
2. If you click Advanced..., you can adjust the outside margins in a range from
5.0 to 25.4 MM.
• For outside margins to the left of the page, enter a number into the
Left (Long Edge) - Width
combo box
.
•
For outside margins to the top of the page, enter a number into the
Top (Short Edge) - Width
combo box
.
• Select the Reduce Image to Fit check box if the printing data extends beyond the
edge of the paper when setting a binding margin. The margins are reduced to match
the page size adjustment.
When you want to change the page size (for example, to enlarge an A4-size brochure for
printing on A3 paper), refer to Using a Different Print Size
on page 41.
Left (Long Edge)
Top (Short Edge)
Reduce Image
to Fit
To Next Page
Loading...
