EasyManuals Logo

Kyocera FS-9120DN User Manual

Kyocera FS-9120DN
115 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
Chapter 2 Handling Paper
2-5
Many envelopes have a diagonal grain orientation (See
Paper
Grain on page 2-3
). This orientation is more likely to wrinkle
and crease on its way through the printer. Before purchasing
envelopes for use with the printer, test a sample to verify the
envelope’s suitability.
Do not use envelopes that have an encapsulated liquid adhe-
sive.
Avoid long printing runs consisting of envelopes only. Exten-
sive envelope printing can cause premature printer wear. To
avoid jamming due to curled envelopes, do not leave more
than approximately 10 printed envelopes stacked in the pa-
per trays during multiple envelope printing.
Colored Paper
Colored paper should satisfy the same conditions as white
bond paper, listed in
1.2Paper Specifications on page 2-1
. In
addition, the pigments used in the paper must be able to with-
stand the heat of fusing during the printing process (up to 200
°C or 392 °F).
Preprinted Paper
Preprinted paper should have a bond paper base. The pre-
printed ink must be able to withstand the heat of fusing dur-
ing the printing process, and must not be affected by silicone
oil.
Do not use paper with any kind of surface treatment, such as
the type of paper commonly used for calendars.
Recycled Paper
Select recycled paper that meets the same specifications as
the white bond paper (see
1.2Paper Specifications on page 2-
1
) except whiteness.
Before purchasing recycled paper, test a sample on the print-
er and check that the print quality is satisfactory.
The printer is capable of printing under the optimum setting
for the type of paper being used.
Setting the paper type for the paper source from the printer’s
operator panel will cause the printer to automatically select
the paper source and print in the mode best suited to that type
of paper.
A different paper type setting can be made for each paper
source including the MP tray. Not only can preset paper types
be selected, but it is also possible for you to define and select
customized paper types. See
Customizing Paper Type on
page 3-46
.
The following types of paper can be set.
Yes: Can be used No: Cannot be used
*This is a paper type defined and registered by the user. Up to eight
types of user settings may be defined. For details on Customizing
Paper Type on page 3-46.
NOTE
3. Paper Type
Paper
source
Media
Type
MP
tray
Paper
Cassette
Paper
Weight
Duplex path
(MP tray avail-
able only in
Cassette mode)
Plain Yes Yes Normal 2 Yes
Transparency Yes No Extra
Heavy
No
Preprinted Yes Yes Normal 2 Yes
Labels Yes No Heavy 1 No
Bond Yes Yes Normal 2 Yes
Recycled Yes Yes Normal 2 Yes
Vellum Yes No Light No
Rough Yes Yes Normal 2 Yes
Letterhead Yes Yes Normal 2 Yes
Color Yes Yes Normal 2 Yes
Prepunched Yes Yes Normal 2 Yes
Envelope Yes No Heavy 1 No
Cardstock Yes No Heavy 2 No
Thick Yes No Heavy 1 No
High quality Yes No Normal 2 Yes
Custom 1
(to 8)*
Yes Yes Normal 2 Yes
Table 2-7

Table of Contents

Other manuals for Kyocera FS-9120DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera FS-9120DN and is the answer not in the manual?

Kyocera FS-9120DN Specifications

General IconGeneral
I/O ports1 x Fast Ethernet 10/100 Base TX; 1 x High speed bi-directional parallel (IEEE 1284); 1 x USB 2.0 (High-Speed); 1 x KUIO LV Option-Interface slot.
Custom media sizes88 x 148 mm - 297 x 450 mm
Power requirementsAC 220/240 V 50/60 Hz
Standard input trays2 x 500
Recommended media weight60 - 105 g/m²
Power consumption (active)920 W
Maximum print size297 x 420 mm
Maximum ISO A-series paper sizeA3
ColorNo
Print technologyLaser
Time to first page (black, normal)7 s
Print speed (black, normal quality, A4/US Letter)36 ppm
Memory slots2
Storage mediaHDD
Processor modelPower PC 750CX
Built-in processorYes
Maximum internal memory544 MB
Internal storage capacity20 GB
Sound power level (standby)39 dB
Sound pressure level (printing)53 dB
Total input capacity1200 sheets
Maximum input capacity4200 sheets
Paper tray 2 input capacity200 sheets
Maximum duty cycle55000 pages per month
Sustainability certificatesENERGY STAR
Power consumption (standby)160 W
Power consumption (PowerSave)12 W
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)585 x 639 x 615 mm

Related product manuals