Kyocera FS-9120DN User Manual

Appendix A Option Units
A-2
PF-70 Paper Feeder
Holds approximately 500 sheets of A5 to A3 (11 × 17" in Led-
ger) size paper. Up to two paper feeders can be attached to the
bottom of the printer.
PF-75 Paper Feeder
Holds approximately 3000 sheets of A4, B5 or Letter size
(8.5 × 11") paper. Only one paper feeder can be attached to the
bottom of the printer.
IB-20/21E/22 Network Interface Card
Is used to communicate using the network protocols such as
NetWare, TCP/IP or EtherTalk.
IB-20/IB-21E/IB-22 Network Interface Cards
Along with the standard for the network interface on the
printer, the network interface card supports TCP/IP, IPX/
SPX, NetBEUI and EtherTalk protocols, so that the printer
can be used on network environments including Windows,
Macintosh, UNIX, NetWare, etc.
DF-71 Document Finisher
Provide finishing with about 3,000 sheets at a time with high-
speed and large-capacity processes. Also provides a punch
function. They are installed to the left side of the printer.
DF-73 Document Finisher
Provides finishing with about 1000 sheets at a time. Also pro-
vides staple and off set functions. It is installed to the left side
of the printer.
DF-75 Document Finisher
Provides the staple, punch (option), offset and stitch func-
tions. It is installed to the left side of the printer.
Other Options
•Hard Disk Unit
Enables the electronic sorting and job retention functions.
To be inserted into the slot OPT1/HDD designed for it on
the main circuit board of the printer.
•
••
•Memory Card (CF)
This is a microchip card that may contain option fonts,
macros, and forms. Insert the memory card into the memory
card slot located on the right of the printer. See your dealer
for purchasing information regarding the memory Cards
that are best suited for use with this printer.
•Memory DIMM
See your dealer for purchasing information of the DIMM
that are best suited for use with this printer. See
Appendix
A Option Units
for the installation procedure.
Network interface card Network connections
IB-20 10Base-T/100Base-TX/10Base-2
IB-21E 10Base-T/100Base-TX
IB-22 IEEE802.11b (Wireless)
Table A-1

Kyocera FS-9120DN Specifications

General

I/O ports	1 x Fast Ethernet 10/100 Base TX; 1 x High speed bi-directional parallel (IEEE 1284); 1 x USB 2.0 (High-Speed); 1 x KUIO LV Option-Interface slot.
Custom media sizes	88 x 148 mm - 297 x 450 mm
Power requirements	AC 220/240 V 50/60 Hz
Standard input trays	2 x 500
Recommended media weight	60 - 105 g/m²
Power consumption (active)	920 W
Maximum print size	297 x 420 mm
Maximum ISO A-series paper size	A3
Color	No
Print technology	Laser
Time to first page (black, normal)	7 s
Print speed (black, normal quality, A4/US Letter)	36 ppm
Memory slots	2
Storage media	HDD
Processor model	Power PC 750CX
Built-in processor	Yes
Maximum internal memory	544 MB
Internal storage capacity	20 GB
Sound power level (standby)	39 dB
Sound pressure level (printing)	53 dB
Total input capacity	1200 sheets
Maximum input capacity	4200 sheets
Paper tray 2 input capacity	200 sheets
Maximum duty cycle	55000 pages per month
Sustainability certificates	ENERGY STAR
Power consumption (standby)	160 W
Power consumption (PowerSave)	12 W

Weight and Dimensions

Dimensions (WxDxH)	585 x 639 x 615 mm