Kyocera FS-9120DN User Manual

4-1
Chapter 4 Troubleshooting
This chapter explains how to handle printer problems that may occur. If a problem cannot be corrected, contact your Kyocera Mita
dealer.
This chapter explains the following topics:
• General Guide
• Print Quality Problems
• Indicators and Messages
• Correcting a Paper Jam
If some kind of problem should occur, check the following before concluding the printer is broken;
If you still cannot correct a printer problem even after checking the above, please contact your Kyocera Mita dealer.
1. General Guide
Symptom Check Items Corrective Action
The printer will not
print from the
computer.
Check the
READY
indicator.
Off Look through the items below and check anything that
seems appropriate.
Flashing An error has occurred. Check the message display, and
then take measures seeing
Indicators and Messages on
page 4-4
.
Lit See the appropriate item below.
Check the !
! !
!
ATTENTION
indicator.
Flashing See Indicators on page 4-4.
Lit
A maintenance message appears in the
message display.
See
Maintenance Messages on page 4-4.
Print quality is not good. See Print Quality Problems on page 4-2 .
Paper is jammed. See Correcting a Paper Jam on page 4-8 .
Nothing lights on the
operator panel even
when power is turned
on and the fan makes no
noise.
Check that the power cord is properly
plugged into the power outlet.
Turn off the printer’s power, plug in the power cord
securely, and try turning on the printer’s power again.
Check that the main switch is really in the ON ( ❘
) position.
The printer prints a
status page, but data
from the computer is
not being printed
normally.
Check the interface cable. Connect both ends of the interface cable securely. Try
replacing the printer cable. For details on the parallel
interface for this printer, see
Appendix B Host
Computer Interface .
Check program files and application
software.
Try printing another file or using another print
command. If the problem occurs only with a specific file
or application, check the printer settings for that
application.
Table 4-1

Kyocera FS-9120DN Specifications

General

I/O ports	1 x Fast Ethernet 10/100 Base TX; 1 x High speed bi-directional parallel (IEEE 1284); 1 x USB 2.0 (High-Speed); 1 x KUIO LV Option-Interface slot.
Custom media sizes	88 x 148 mm - 297 x 450 mm
Power requirements	AC 220/240 V 50/60 Hz
Standard input trays	2 x 500
Recommended media weight	60 - 105 g/m²
Power consumption (active)	920 W
Maximum print size	297 x 420 mm
Maximum ISO A-series paper size	A3
Color	No
Print technology	Laser
Time to first page (black, normal)	7 s
Print speed (black, normal quality, A4/US Letter)	36 ppm
Memory slots	2
Storage media	HDD
Processor model	Power PC 750CX
Built-in processor	Yes
Maximum internal memory	544 MB
Internal storage capacity	20 GB
Sound power level (standby)	39 dB
Sound pressure level (printing)	53 dB
Total input capacity	1200 sheets
Maximum input capacity	4200 sheets
Paper tray 2 input capacity	200 sheets
Maximum duty cycle	55000 pages per month
Sustainability certificates	ENERGY STAR
Power consumption (standby)	160 W
Power consumption (PowerSave)	12 W

Weight and Dimensions

Dimensions (WxDxH)	585 x 639 x 615 mm