Kyocera FS-9120DN User Manual

iii
4. You agree not to duplicate or copy the Software or Type-
faces, except that you may make one backup copy. You
agree that any such copy shall contain the same propri-
etary notices as those appearing on the original.
5. This License shall continue until the last use of the Soft-
ware and Typefaces, unless sooner terminated. This Li-
cense may be terminated by Agfa Japan if you fail to
comply with the terms of this License and such failure is
not remedied within thirty (30) days after notice from
Agfa Japan. When this License expires or is terminated,
you shall either return to Agfa Japan or destroy all copies
of the Software and Typefaces and documentation as re-
quested.
6. You agree that you will not modify, alter, disassemble, de-
crypt, reverse engineer or decompile the Software.
7. Agfa Japan warrants that for ninety (90) days after deliv-
ery, the Software will perform in accordance with Agfa Ja-
pan-published specifications, and the diskette will be free
from defects in material and workmanship. Agfa Japan
does not warrant that the Software is free from all bugs,
errors or omissions.
The parties agree that all other warranties, expressed or
implied, including warranties of fitness for a particular
purpose and merchantability, are excluded.
8. Your exclusive remedy and the sole liability of Agfa Japan
in connection with the Software and Typefaces is repair or
replacement of defective parts, upon their return to Agfa
Japan.
In no event will Agfa Japan be liable for lost profits, lost
data, or any other incidental or consequential damages, or
any damages caused by abuse or misapplication of the
software and Typefaces.
9. New York, U.S.A. law governs this Agreement.
10. You shall not sublicense, sell, lease, or otherwise transfer
the Software and/or Typefaces without the prior written
consent of Agfa Japan.
11. Use, duplication or disclosure by the Government is sub-
ject to restrictions as set forth in the Rights in Technical
Data and Computer Software clause at FAR 252-227-
7013, subdivision (b)(3)(ii) or subparagraph (c)(1)(ii), as
appropriate. Further use, duplication or disclosure is sub-
ject to restrictions applicable to restricted rights software
as set forth in FAR 52.227-19 (c)(2).
12. You acknowledge that you have read this agreement, un-
derstand it, and agree to be bound by its terms and condi-
tions. Neither party shall be bound by any statement or
representation not contained in this agreement. No
change in this agreement is effective unless written and
signed by properly authorized representatives of each par-
ty. By opening this diskette package, you agree to accept
the terms and conditions of this agreement.

Kyocera FS-9120DN Specifications

General

I/O ports	1 x Fast Ethernet 10/100 Base TX; 1 x High speed bi-directional parallel (IEEE 1284); 1 x USB 2.0 (High-Speed); 1 x KUIO LV Option-Interface slot.
Custom media sizes	88 x 148 mm - 297 x 450 mm
Power requirements	AC 220/240 V 50/60 Hz
Standard input trays	2 x 500
Recommended media weight	60 - 105 g/m²
Power consumption (active)	920 W
Maximum print size	297 x 420 mm
Maximum ISO A-series paper size	A3
Color	No
Print technology	Laser
Time to first page (black, normal)	7 s
Print speed (black, normal quality, A4/US Letter)	36 ppm
Memory slots	2
Storage media	HDD
Processor model	Power PC 750CX
Built-in processor	Yes
Maximum internal memory	544 MB
Internal storage capacity	20 GB
Sound power level (standby)	39 dB
Sound pressure level (printing)	53 dB
Total input capacity	1200 sheets
Maximum input capacity	4200 sheets
Paper tray 2 input capacity	200 sheets
Maximum duty cycle	55000 pages per month
Sustainability certificates	ENERGY STAR
Power consumption (standby)	160 W
Power consumption (PowerSave)	12 W

Weight and Dimensions

Dimensions (WxDxH)	585 x 639 x 615 mm