Kyocera FS-9120DN User Manual

Chapter 3 Using the Operator Panel
3-23
KPDL (AUTO) Emulation
KPDL is the Kyocera’s implementation of the PostScript lan-
guage. The KPDL (AUTO) emulation enables the printer to
automatically change the emulation mode according to the
data received when printing.
In addition to KPDL (AUTO) emulation, you can use the op-
erator panel to set another emulation mode that is used very
often. The default setting is PCL 6.
Press the MENU key.
Press the  or  key repeatedly until Emulation
appears.
Press the ENTER key. A blinking question mark (?)
appears.
Press the  or  key repeatedly until KPDL (AUTO)
appears.
Press the ENTER key.
Press the  key. When >
Alt. Emulation
is dis-
played, press the  or  key. The names of alterna-
tive emulations appear.
PCL 6 (default)
KC-GL
Line Printer
IBM Proprinter
DIABLO 630
EPSON LQ-850
Press the ENTER key. A blinking question mark (?)
appears.
Press the  or  key repeatedly until the desired al-
ternative emulation appears.
Press the ENTER key.
Press the MENU key. The message display returns to
Ready.
Auto Printing of KPDL Error
The printer can be set to print error data during KPDL emula-
tion. If this is set to
On
, error data will be printed only when trou-
ble occurs during printing. The factory default setting is
Off
.
Press the MENU key.
Press the  or  key repeatedly until Emulation
appears.
Press the ENTER key. A blinking question mark (?)
appears.
Select KPDL or KPDL (AUTO) using the  or  key.
Press the ENTER key.
Press the  key. The message display changes to
that shown below. If >Print KPDL Errs is dis-
played when the KPDL (AUTO) emulation is select-
ed, press the  or  key to change it.
Press the ENTER key. A blinking question mark (?)
appears.
Select On using the  or  key.
Press the ENTER key.
Press the MENU key. The message display returns to
Ready.
Emulation
PCL 6
Emulation
?PCL 6
Emulation
?KPDL (AUTO)
Alt. Emulation
?PCL 6
1
2
3
4
5
6
7
8
9
Emulation
PCL 6
Emulation
?PCL 6
Emulation
?KPDL
>Print KPDL Errs
Off
>Print KPDL Errs
?Off
>Print KPDL Errs
?On
10
1
2
3
4
5
6
7
8
9
10

Kyocera FS-9120DN Specifications

General

I/O ports	1 x Fast Ethernet 10/100 Base TX; 1 x High speed bi-directional parallel (IEEE 1284); 1 x USB 2.0 (High-Speed); 1 x KUIO LV Option-Interface slot.
Custom media sizes	88 x 148 mm - 297 x 450 mm
Power requirements	AC 220/240 V 50/60 Hz
Standard input trays	2 x 500
Recommended media weight	60 - 105 g/m²
Power consumption (active)	920 W
Maximum print size	297 x 420 mm
Maximum ISO A-series paper size	A3
Color	No
Print technology	Laser
Time to first page (black, normal)	7 s
Print speed (black, normal quality, A4/US Letter)	36 ppm
Memory slots	2
Storage media	HDD
Processor model	Power PC 750CX
Built-in processor	Yes
Maximum internal memory	544 MB
Internal storage capacity	20 GB
Sound power level (standby)	39 dB
Sound pressure level (printing)	53 dB
Total input capacity	1200 sheets
Maximum input capacity	4200 sheets
Paper tray 2 input capacity	200 sheets
Maximum duty cycle	55000 pages per month
Sustainability certificates	ENERGY STAR
Power consumption (standby)	160 W
Power consumption (PowerSave)	12 W

Weight and Dimensions

Dimensions (WxDxH)	585 x 639 x 615 mm