Kyocera FS-9120DN User Manual

Chapter 3 Using the Operator Panel
3-49
Message Language Selection
You can select the language of the messages on the message
display by following the procedure given below.
Press the MENU key.
Press the  or  key repeatedly until Others > ap-
pears.
Press the  key.
Press the  or  key repeatedly until >MSG
Language appears. The default message language is
English.
To change the language, press the ENTER key. A
blinking question mark (?) appears.
Press the  key. The display cycles through the
available selections in the following order (The 
key cycles in the reverse order):
English
Francais
Deutsch
Italiano
Nederlands
Espanol
Portugues
Press the ENTER key.
Press the MENU key. The message display returns to
Ready.
Automatic Form Feed Timeout Setting
When the printer receives no data for a certain time, it times
out and releases the current interface: it prints whatever
data it has in its buffer and feeds out the page. You can ad-
just the time-out time as follows:
Press the MENU key.
Press the  or  key repeatedly until Others > ap-
pears.
Press the  key.
Press the  or  key repeatedly until >Form Feed
Time Out appears. The default setting is 30 seconds.
Press the ENTER key. A blinking cursor (_) appears.
Press the  or  key to increase or decrease the val-
ue of the figure where the cursor is blinking and set
the desired time. The time can be set between 0 and
495 seconds, in 5-second increments. (The printer
does not timeout with the value set to 0.) You can use
the  and  keys to move the cursor right and left.
Display the desired time and press the ENTER key.
Press the MENU key. The message display returns to
Ready.
Sleep Timer Setting
The printer has a sleep timer to conserve power when the
printer is not printing, processing, or receiving data. You can
adjust the timer value, the length of time the printer waits
before entering sleeping mode in the absence of data.
Press the MENU key.
Press the  or  key repeatedly until Others > ap-
pears.
Press the  key.
Others >
>MSG Language
English
>MSG Language
? English
1
2
3
4
5
6
7
8
1
Others >
>Form Feed
Time Out 030sec.
>Form Feed
Time Out 030
sec.
Others >
2
3
4
5
6
7
8
1
2
3

Kyocera FS-9120DN Specifications

General

I/O ports	1 x Fast Ethernet 10/100 Base TX; 1 x High speed bi-directional parallel (IEEE 1284); 1 x USB 2.0 (High-Speed); 1 x KUIO LV Option-Interface slot.
Custom media sizes	88 x 148 mm - 297 x 450 mm
Power requirements	AC 220/240 V 50/60 Hz
Standard input trays	2 x 500
Recommended media weight	60 - 105 g/m²
Power consumption (active)	920 W
Maximum print size	297 x 420 mm
Maximum ISO A-series paper size	A3
Color	No
Print technology	Laser
Time to first page (black, normal)	7 s
Print speed (black, normal quality, A4/US Letter)	36 ppm
Memory slots	2
Storage media	HDD
Processor model	Power PC 750CX
Built-in processor	Yes
Maximum internal memory	544 MB
Internal storage capacity	20 GB
Sound power level (standby)	39 dB
Sound pressure level (printing)	53 dB
Total input capacity	1200 sheets
Maximum input capacity	4200 sheets
Paper tray 2 input capacity	200 sheets
Maximum duty cycle	55000 pages per month
Sustainability certificates	ENERGY STAR
Power consumption (standby)	160 W
Power consumption (PowerSave)	12 W

Weight and Dimensions

Dimensions (WxDxH)	585 x 639 x 615 mm