2GL/2FV/2FW
1-7-4
(3) Downloading the firmware from the memory card (For 16/18 ppm printers)
To download data written in a memory card (CompactFlash) to the printer, proceed as explained in this section.
CAUTION
Downloading firmware takes several minutes. Do not turn power off during downloading. If downloading is interrupted by
an accidental power failure, etc., the main PWB may have to be replaced.
Do not download the system firmware and engine firmware at one time. Store the either firmware in a memory card and
download one by one.
1. Turn power switch off.
2. Remove the right side cover.
3. Insert the memory card in the printer’s mem-
ory card slot.
Figure 1-7-3
Right side cover
Top cover
Memory
card socket
Memory card
Main PWB
To Next Page
Loading...
