Using the Operation Panel
ADVANCED OPERATION GUIDE 2-87
Other Modes
The modes described in the following pages can be accessed in the Others
submenu. To enter the Others submenu, press Z while Others > is
displayed.
The following submenus can be displayed by pressing Z and then U or V.
• Message Language Selecting
• Automatic Form Feed Timeout Setting
• Sleep Timer Setting
• Received Data Dumping
•Restart Printer
• Resource Setting
• Alarm (Buzzer) Setting
• Auto Continue Setting
• Finishing
• Service Menu (for service personnel)
Selecting the Message Language
You can select the language of the messages on the message display by
following the procedure given below.
1
Press [MENU].
2
Press U or V repeatedly until Others >
appears.
3
Press Z.
4
Press U or V repeatedly until >MSG
Language appears. The default message
language is English.
5
To change the language, press [OK]. A
blinking question mark (?) appears.
6
Press U. The display cycles through the available selections in the
following order (V cycles in the reverse order):
English
Francais
Deutsch
Italiano
Nederlands
Español
Português
Others >
>MSG Language
English
>MSG Language
? English
To Next Page
Loading...
