Using the Operation Panel
ADVANCED OPERATION GUIDE 2-9
Cursor Keys
The four cursor keys are used in the menu system to access an item or
enter numeric values.
The arrow key with the question mark ( ) may be pressed when the paper
jam message has appeared on the message display. A help message will
then appear to facilitate jam clearing in the location.
* OK Key
This key is used to:
• Finalize settings of numeric values and other selections.
• Set the paper source when Use alternative? is shown in the
message display.
* If you hold down [OK] and press [MENU] when Ready is shown
on this printer, Password will be displayed. This is the login
screen for administration under the Job Accounting System and
is normally not used. Press [MENU] to return to the Ready
display.
To Next Page
Loading...
