System Maintenance Reference
99
13. Reconnect the telephone line cable to the machine.
The update’s percentage of completion might not be displayed, depending on which
version of the firmware is currently installed.
In addition to printing a configuration page, you can check the machine’s firmware
version by accessing the machine using a web browser. For details, see “Checking
Machine Status” in the User Guide.
Depending on how it is configured, the machine might start up in fax mode following
the firmware update.
Updating the Engine Firmware
1. Make a folder in your computer.
2. Save the files (".bin", ".fwu", ".ini" and ".exe") in the folder.
3. Click the exe file to execute the updating program.
4. Click "Eng. F/W Update (USB or NET)" to send the engine firmware from PC to MF
printer.
The "F/W Update (USB or NET)" buttons are for designer use only. Do not use
these buttons.
5. The machine makes a beep sound when starting the firmware update.
6. The image above is displayed at the PC and "Firmware update" and "Updating" are
To Next Page
Loading...
