Kyocera FS-C1020MFP

Replacement and Adjustment
39
5. Waste toner sensor base [B]
6. Remove the mylar fixing three hooks of the waste toner bottle set sensor.
7. Waste toner bottle set sensor [C] (hooks, x 1)
 When reinstalling the waste toner bottle set sensor, connect it to the white
connector of the harness.
Waste Toner Overflow Sensor
1. Remove all AIO cartridges. (→ p.26)
2. Image transfer belt unit (→ p.31)
3. EGB (→ p.59)
4. Waste toner sensor base (→ p.38 "Waste Toner Bottle Set Sensor")