System Maintenance Reference
100
displayed on the operation panel.
7. Then, you can close this window at your PC.
Do not turn off the machine until "Done Please reboot" is displayed in the operation
panel. Otherwise, the controller board will be damaged.
If “Done Please reboot“ does not appear, the download failed. Try again. You can
also switch from an Ethernet connection to a USB connection and see if that works.
If you still cannot download the firmware, it may be necessary to change the EGB
and/or the controller board.
If power failed during the download, try again. If you still cannot download the
firmware, it may be necessary to change the EGB and/or the controller board.
Boot Loader Firmware
This is also listed on the configuration page, but this firmware is not updated in the field.
To Next Page
Loading...
