Kyocera FS-C1020MFP

Replacement and Adjustment
64
ID Chip Board
1. Operation panel (→ p.17)
2. Rear cover (→ p.16)
3. Left cover (→ p.18)
4. Controller bracket (→ p.57 "Controller Board")
5. Disconnect the connector (CN305) on the EGB.
6. Interlock switch base (→ p.61 "Interlock Switches")
7. Fusing fan base (→ p.62 "Fusing Fan Motor")
8. Drive unit (→ p.26 "Black AIO Motor")
9. Take the harnesses aside around the LSU fan base [A].
10. LSU fan base [A] (
x 2, x 1)
11. ID Chip Board [B] ( x 3)
PSU
1. Operation panel (→ p.17)
2. Rear cover (→ p.16)
3. Left cover (→ p.18)
4. Drive unit (→ p.26 "Black AIO Motor")
5. LSU fan base (→ p.63 "LSU Fan Motor")