Kyocera FS-C1020MFP - Page 149

Appendix: SP Mode Tables
34
printed.
Off (Default)/ Error/ On
Engine Maintenance
Text
Determines the maximum amount of ink/toner you
can use in any area of your text. This is where you
are controlling exactly how much ink will be used
during printing.
[200 to 400 / 250 (Default)/ 10/step]
Setting 0: Off
Graphic
Determines the maximum amount of ink/toner you
can use in any area of your graphic. This is where
you are controlling exactly how much ink will be
used during printing.
[200 to 400 / 250 (Default)/ 10/step]
Setting 0: Off
Toner Limit
Image
Determines the maximum amount of ink/toner you
can use in any area of your image. This is where
you are controlling exactly how much ink will be
used during printing.
[200 to 400 / 250 (Default)/ 10/step]
Setting 0: Off
P
N
P Name
NA Model: RICOH/ 'nul'
EU Model: RICOH/ NRG/ LANIER
ASIA Model: RICOH/ LANIER
China Model: RICOH
Destination
Sets the destination and updates the engine setting.
JPN/ NA (Default)/ EU/ ASIA/ China
2nd Transfer
Fuser Temp.
2nd Transfer
Front
Adjusts the transfer roller current, based on the
default value.
[-15 to 15 / 0 (Default) / 1 μA/step]