Appendix: SP Mode Tables
43
Fax Maintenance
Symbol Rate
This setting limits the transmission speed range in
V.34 mode by masking the desired symbol rate(s).
[Not Used (Default)/ 3429 Sym/Sec
/ 3200 Sym/Sec/ 3000 Sym/Sec
/ 2800 Sym/Sec/ 2400 Sym/Sec]
The "Reseller Default" menu can be entered directly at power-on. If you want to
enter this mode directly, try the following procedure.
Turn on the machine while pressing the "Copy" key.
Fax Service Test Menu
Entering the Fax Service Test Menu
Turn on the machine while pressing the "Fax" key.
Selecting an Item
To select the item, press the "Up" or "Down" key.
Going into the Next Level/ Returning to the Previous Level
To go into the next level of an item, select an item then press the "OK" key.
To return to the previous level of an item, press the "Return" key.
Exiting the Maintenance Mode Menu
To exit the maintenance mode menu, press the "Clear/Stop" or "Return" key until the
"Ready" display appears.
Menu List
Fax Test
On Hook Executes the on hook test.
Off-Hook Test
Off Hook Executes the off hook test
To Next Page
Loading...
