Kyocera FS-C8500DN

Using the Operation Panel 4-39
4 Enter the access code entered in the printer driver.
Use the Y and Z to select a number and then press [OK] to enter the
number.
You can go back one character by pressing [Bckspace] ([Left
Select]).
5 Press [Enter] ([Right Select]). If the entered access code is
correct, the Delete menu screen appears. If the entered access code
is incorrect, the ID menu screen reappears.
6 Press [Yes] ([Left Select]). Complete. appears and the printer
deletes the selected job.
Pressing [No] ([Right Select]) returns you to return to the previous
screen.
Delete.
Are you sure?
z Q Data01
[ Yes ] [ No ]
Note When the access code is set to the document selected in
the check box, ID error is displayed for the disagreement.
Completed.