Kyocera FS FS-1300D User Manual

Connecting and Printing 3-15
Status Tab
The Status tab displays current information about the device, such as the
model name, system firmware, engine firmware, serial number, total
memory, and number of printed pages.
Input Tab
The Input tab displays information about the paper feeder attached to the
machine, such as the current paper level and the maximum paper
capacity.
This tab also enables you to customize the paper size and type of the
paper cassette or optional paper feeder. If you selected Custom as the
paper size for Cassette 1 to Cassette 3, you can use this tab to set the
width (X) and height (Y) of the custom paper.
Media Tab
The Media tab displays and lets you select the weight and density for
each media type. It also enables or disables duplex printing for the each
media type. Duplex printing is available for FS-1300D only.

Kyocera FS FS-1300D Specifications

General

Print Technology	Laser
Resolution	1200 x 1200 dpi
Connectivity	USB 2.0
Warm-up Time	15 seconds
Time to First Page	6 seconds
Output Capacity	250 sheets
Processor Frequency	360 MHz
First Print Out Time	6 seconds
Dimensions	375 x 393 x 250 mm
Weight	10.5 kg
Print Speed	28 ppm
Paper Capacity	250 sheets
Memory	32 MB
Supported Operating Systems	Windows, Mac, Linux