Kyocera FS FS-1300D User Manual

Troubleshooting 5-9
Cleaning Paper Jams
If paper jams in the paper transport system, or no paper sheets are fed
at all, the printer automatically goes offline, and the Jam indicator will
light. Status Monitor or COMMAND CENTER can indicate the location of
the paper jam (the component where the paper jam has occurred).
Remove the paper jam. After removing the paper jam, the printer will
resume printing.
Possible Paper Jam Locations
The figure below shows the printer's paper paths including the optional
paper feeder. The locations where paper jams might occur are also
shown here, with each location explained in the table below. Paper jams
can occur in more than one component on the paper paths.
Paper jam location Description Reference page
A Paper jam at the MP tray. page 5-10
B Paper jam at the paper cassette. The cassette number can be 1. page 5-11
C Paper jam inside the duplex section. page 5-12
D Paper jam inside the printer. page 5-13
E Paper jam at the rear cover. page 5-15

Kyocera FS FS-1300D Specifications

General

Print Technology	Laser
Resolution	1200 x 1200 dpi
Connectivity	USB 2.0
Warm-up Time	15 seconds
Time to First Page	6 seconds
Output Capacity	250 sheets
Processor Frequency	360 MHz
First Print Out Time	6 seconds
Dimensions	375 x 393 x 250 mm
Weight	10.5 kg
Print Speed	28 ppm
Paper Capacity	250 sheets
Memory	32 MB
Supported Operating Systems	Windows, Mac, Linux